Home » ACF Corner Former »
Cornerformer Machine Information
| CYCLE TIME per CORNER | |
| CORNERFORMER-Multiflex MF25/50/100 (for job shop) | appr. 13 seconds |
| CORNERFORMER-Variform (for mass production) | appr. 8 seconds |
| Handling time included | |
| FORMABLE SHEET MATERIALS | |
| Mild Steel | 0.8 mm - 5.0 mm |
| Aluminium | 1.2 mm - 5.0 mm |
| Stainless Steel (Multiflex) | 0.8 mm - 3.0 mm |
| Stainless Steel (Variform) | 0.8 mm - 1.2 mm |
| Special Corner angle | min. 45° up to max. 150° |
| Special Corner radius | min. 2 mm up to max. 100 mm |
| DIMENSIONS OF PANEL/DOOR | |
| Minimum length and width | 65 mm / 65 mm |
| Maximum length and width | no limits |
| CONTROL (Modular System) | B & R including ACF-Software |
| HYDRAULIC SYSTEM - oil capacity | 40 litres |
| ONE TOOLING SET includes: | |
| (for both machine types) | - Pressure plate |
| (Corner radius
of Pressure plate acc. Forming tool) |
|
| - Forming tool | |
| - Shear blade | |
| - Forming block (Multiflex) | |
| - Forming plate (Variform) | |
| CHANGEOVER TIME of individual TOOLS | |
| Pressure plate | 30 seconds |
| (Corner radius of Pressure plate acc. Forming tool) | |
| Forming tool | 2 minutes |
| Forming block / Forming plate | 30 seconds |
| Shear blade | 2 minutes |
| ELECTRICAL DATA | |
| Electrical supply | 400 V, 50 Hz |
| Installed power | 4,5 kW |
| Fuse protector of power supply | 16 amps, slow |
| DIMENSIONS | |
| Working Height | 950 mm |
| Overall Height | 1580 mm |
| Required floor space (L x W) | 1450 mm x 1100 mm |
| WEIGHT including Hydraulic oil | about 800 kg |
| SAFETY CONFORMITY | to CE Requirements |
Contact one of our sales representatives
to inquire about a quote from
or call us today at 847-301-9005